Kingdom Stopping Compound (Bonding, Jointing, Skimming) used for flushing joints of plasterboard. It can also be used as putty to touch-up the fibrous plasterboard that produces a smooth fine finished using steel trowel. Designed for all plaster board jointing to provide extra smooth, quick and excellent solution. It can use to skim interior wall when necessary.
Kingdom Stopping Compound must be stored in a dry place with pallet.
Kingdom Stopping Compound has a shelf life of 9 months from date of manufacture.
Kingdom Stopping Compound storage in an unsuitable environment can shorten the lifespan of this product.
Pour clear water into the tray.
Add Kingdom Stopping Compound to clear water at a ratio of 2 parts of plaster to 1 part water. Allow to soak for approximately 2 – 3 minutes before mixing.
Mix thoroughly until a smooth consistency compound is achieved. Avoid mixture with the residue of older bathes.
Use as bonding and fixing to plasterboard and ceiling or cornice.
Use for coating the joints of plasterboard.
Smooth the surface by using trowel with 1-3 mm thickness.
Health & Safety
Kingdom Stopping Compound is not hazardous based on the major compound. However, we do recommend workers shall use safety equipment where necessary. In case of eye contact, immediately hold eyelids apart and flush eye continuously with running water. Get medical aid immediately when necessary.
Note: The information about applications and suggestions for use is based on practical experience. As due to various site conditions and unable to control the applications, therefore no responsibility can be accepted by us for any loss and damage as this data sheet is for general guidance only.
Note: PMIX reserve the rights to revise any data without prior notice.