Kingdom Skim Coat Finish

KINGDOM SKIM COAT FINISH is a special polymer modified top quality water resistance skim coat. It provides better and very smooth surface finishing on concrete surfaces, slab, panel, block wall and etc. It offers high bond strength, improve workability, consistency, crack free compare to other plastering compound.

Do not apply on painted surfaces.

Technical Data

ColourWhite
BinderWhite Portland Cement
FillerGraded Limestone
Water Ratio Demand9 -10 Litre per 25Kg Skim Coat
Wet Density1700 Kg/ M3
Dry Density1200 Kg/ M3
Compressive Strength12 – 17N /MM2
CoverageApproximately 0.85M2 Per Kg (1mm Thick)
Recommended Thickness3mm – 4mm / Layer

Packing & Storage

  • KINGDOM Skim Coat Finish packed in 25KG± bags.
  • KINGDOM Skim Coat Finish must be stored in a dry place with pallet.
  • KINGDOM Skim Coat Finish has a shelf life of 9 months from date of manufacture.
  • KINGDOM Skim Coat Finish storage in an unsuitable environment can shorten the lifespan of this product.

Application Instruction

Kingdom Skim Coat Finish

Step 1
Add clean water into basket.

Kingdom Skim Coat Finish

Step 2
Mix approximately 9 litres of water with Kingdom Skim Coat Finish (25kg).

Kingdom Skim Coat Finish

Step 3
Mix thoroughly using an electric mixer for 3 – 5 minutes until additives to dissolve.

Kingdom Skim Coat Finish

Step 3
Apply Kingdom Skim Coat Finish with a steel trowel. If requires several layers, the underneath layers must be dry before spreading the subsequent layer.

Health & Safety

KINGDOM SKIM COAT FINISH is not hazardous based on the major compound. However, we do recommend workers shall use safety equipment where necessary. In case of eye contact, immediately hold eyelids apart and flush eye continuously with running water. Get medical aid immediately when necessary.

Note: The information of applications and suggestions for use is based on practical experience. As due to various site conditions and unable to control the applications, therefore no responsibility can be accepted by us for any loss and damaged as this data sheet is for general guidance only.

Note: PMIX reserve the rights to revise any data without prior notice.